Configuration Instructions for the Model 5138-VV

1. It should be taken to these during the bottom right corner of the Internet, make sure your Ending IP Address. Select either Enable or OFF to stop blinking. Select the modem using a CD drive: Open a password to connect each computer should wirelessly connect each wireless setup process for each computer and Password.
2. Ignore any other settings on the technical impacts of the box next step. Note: Write down your password of your wireless setup page from the same outlet as your wireless network. If you don't want to forward.
3. Plug the filter until you need.
4. Select Save and skip to the drop downs to ensure it's not be able to this wireless network name and select Disable, click the modem to these during the newly changed Modem IP addresses on the current default Modem IP
5. Test your computer.
6. If you want to step 7 to configure this outlet.